C2 2250 Video Scaler
code: VIN07007
C2-2250 Video Scaler PLUS has all the functions and features of the C2-2200 and adds a wide variety of additional capabilities, such as Picture-In-Picture, Chromakey, Lumakey and Mixing. The Key Mode allows computer graphics to be keyed over an external Composite or S-Video signal. The keyed image may be faded in and out. Due to the 4:4:4 sampling format, precise keying at the pixel level can be achieved. The Mix Mode permits glitch-free mixing between the computer image and external video. The PIP Mode allows either of the computer inputs to be inset in a window over either of the video inputs or visa versa. The C2-2255 provides an SDI input as well.
Our exclusive AutoSet® feature takes the hassle out of setup by automatically sizing and positioning the computer image to fit exactly on the video screen. All settings are stored in non-volatile memory and are retained even when power is switched off. Optional rackmount kits are available for all C2-2000 models.
Edge Blending
Edge Blending is a standard feature of the C2-2250 and C2-2255. Because of the ability to ‘feather’ any or a of the edges, multiple images can be aligned vertically, horizontally, or both to create unusual displays. Using multiple units, there is no limit to the number of blended images. Edge Blending is not limited to high resolution RGB computer images, but can be applied to any input. Gamma correction is employed to compensate for many of the problems faced when blending projectors. Special preparation of the video in advance is not necessary, since all processing is done within the unit. <For more info on Edge Blending click here>
Input Expansion Options
Input Expansion to add additional DVI, RGB, YPbPr, YUV, Composite or S-Video inputs is easy by using any of the optional S2 Series Input Expansion Switchers. The S2 unit links to any C2-2000 series unit via an Options Interconnect Cable and becomes an integral part of scaler from a control and operational standpoint. The routing of these additional inputs is controlled directly from the control system of the C2. Multiple different S2 models may be simultaneously connected.
Key Features of the C2-2250
- Automatic incoming resolution detection
- Analog Computer Input via HD-15 Connector
- DVI-D Computer Input via DVI-I Connector
- Inputs: 2x CV, 2x YC, 1x YUV/YPbPr Component
- 1x SDI Input (C2-2205)
- Scaling of the RGB or YPbPr input signal
- Computer Resolutions to 2048x2048
- HDTV Resolutions to 1080p
- AutoSet® - Automatic picture sizing
- Multiple Worldwide Television Standards
- 2x Outputs (RGB or YPbPr) – DVI-D & Analog
- Integral 4x1 Stereo Audio Routing Switcher
- RS-232 & IP Interface and Windows Control Panel
- IR Remote Control
- Variable Image Zoom to 10X and Shrink to 10%
- Optional Single/Dual Rackmount Kit
- Optional Input Expansion for additional inputs
- Picture-in-Picture
- Chromakey and Lumakey
- Edge Blending